Sluggo Music Technology LLC maintains the largest remaining inventory of Pearce Amplifier parts for repair and service of your amp.  We are world's foremost technical authority and service center for the entire Pearce product line.  We take great pride in clear communication,  fast turn-around times and expert original factory service.

Estimates

We will send you an email with a detailed description of the work that needs to be done and what it will cost. Otherwise, we can give you a call with a verbal estimate.

Shipping

Send us an email or give us a call at 727-247-2520 for more information and shipping address for amp servicing.

Packing Suggestions:

  • Wrap your Pearce amp in bubble wrap. If you do not need the cabinet or speaker repaired, just send the rack mount amp to us, this will save you $ in shipping charges.
  • Use a sturdy, double corrugated boxes for heavy items.
  • Make sure there is at least 2-4 inches of packing on all sides.
  • Write your return authorization number on the outside of the carton. Keep a copy of this number for your records. This is how your amp is tracked when we receive it.
  • Do not send any extra items such as manuals, power cables or footswitch unless there is a problem specifically with the footswitch or amplifier channel switching, etc.
  • Insure your product for its current full replacement value.

Turn-around Time

On average, our turn-around time is approximately 7-14 business days upon receipt of your product. However, depending on our work load, these times can change upon demand.  Once we have inspected your amp and given you an estimate that's approved by you, your amp will be put in the queue for repair on a first come, first serve basis.  If there is any change in status, you will be notified immediately. We are upfront, honest and understanding of your needs and expectations.  We treat every Pearce amp and it's owner with the utmost respect and care. We're also Pearce amp owners and collectors and we appreciate your business!

Repair Rates

How much will the repair cost?  Sometimes we can estimate over the phone, but it's impossible to be 100% accurate without actually seeing the amp. Typical repairs are completed within 1 - 2 hours and most parts costs are less than 25% of the total repair bill. Here is a list of our shop rates:

Standard Service Rate - $85.00 /Hr
Estimate fee only - $40.00 (Estimate fee is applied to the cost of the repair)

Rush Fee $50.00
Guaranteed estimate and/or service repair with 48 hours of receipt and parts availability.      Rush Service Fee is in addition to the Standard Service Rate and Estimate Fee.

Please note: Estimates are given as accurately as possible. However, the final repair bill may be slightly different than the estimated cost due to additional parts and labor that may be required to complete the repair. The quote is guaranteed to be within 10% of the estimated cost, otherwise you will be notified for further approval.

New G2r Ribbon cable sets $35:  www.reverb.com/shop/suncoast

G1, G2x AMP MODS

We can also provide original factory mods to your Pearce for a flat fee.

G1.7 Mod - $199.00 (Adds extra gain to Channel 1, also changes EQ tone similar to G2R )

G2x Preamp - ICEpower Class D Amp Mod - $299 (Turn your G2x Preamp into a 125W/CH Amp!)

G1c PREAMP MODS

G1c Deluxe Overdrive Mod - $299 (New Updated Power Supply Board) with BS Mod selectable with CH 1 Boost Switch ON. Channel 1 is still useable as a clean preamp in normal mode. This mod  removes the Reverb tank and adds an Auxiliary FX loop like the BC1. It also replaces the balanced output transformer with low noise active balanced circuit.

BC1 PREAMP MODS

BC1 - Standard Overdrive Mod - $199.00 (Note: Due to the radical reconfiguration of EQ and gain the original BS Mod renders Channel 1 relatively impractical for "Normal" playing)

BC1 - Deluxe Overdrive Mod - $299 (New Updated Power Supply Board) with BS Mod selectable with CH 1 Boost Switch ON. Channel 1 is still useable as a clean preamp in normal mode. Also replaces the balanced output transformer with low noise active balanced circuit.

BC1 - ICEpower Class D Amp Mod - $299 (Turn your BC1 into a 550W Bass Amp!) 

For More Info Contact: service@sluggomusic.com

Home